Machine Thread
My thread keeps getting caught on the shin area of my Sewing Machine, why?
Threading a sewing machine, using a coil. Why is the thread gets tangled in the bobbin. It is a coil where you have to get the little money, like the oldest. New machine although
The major culprits here are usually no tension in the thread top (dirty or improper thread tension), or dirt on the needle plate, or inappropriate from the seams. Take all the threads on your machine. Manual digging and cleaning of the coil area of the machine. thread again from zero, * sure * to raise the foot while screw top (which can drop to thread the needle). Follow the instructions. Thread to the bobbin case and insert. Pull 4-6 "of thread through the eye of the needle. Use the wheel to raise the Bobbin Thread. (Always turn the wheel in the right direction!) Pull 4.6 "thread in the bobbin. Put your work under the needle. Use the wheel to lower the needle at the beginning of the seam. Attach the presser foot. Lift the coil and the top end of the thread and keep the foot behind. Use the steering wheel to 1.3 points. Drop the thread ends and sew normally. Always hold on to the tails of thread at the start of a seam – that prevents the crawler thread in the seams start to become in thread jams in bobbin area.
