Stabilizing router’s power ?
hello friends, i have a dsl router “Shiro” and its giving me power stability issues, its connects to the internet and everything but when ever i get a slight flicker of power of something like 10volts (give or take) and restarts or loses sync. The router uses a 9v, 500mA adapter
i have a ups, a servomotor stabilizer but nothing helps. Is there anything i can do?
By the way, i have a 12v 100amp battery with the ups so is they any way i can convert that 12v into 9v and run my router 24/7 of battery power, thats the most stable way i think and at 500mA my battery would power the router for 200 hours without charger is that right.
Your UPS will only kick in the inverter if the voltage drops out and then there is the kick-in time… those tolerances might exceed what you are saying you need. A line conditioner will only filter out noise and such… What you might need is an always-on battery UPS… an Inverter draws from the battery at all times while the AC keeps the batteries topped off… this way the “downstream” components are isolated from the street voltage.
The draw on your UPS isn’t the only factor in the battery life.. The inverter is running… providing enough AC for its maximum output… If you don’t have anything connected to an unplugged UPS, it will drain itself in a hour or so just running the inverter.. Sorry.
This seems awful excessive for a DSL router… sounds like a better router would be the cheaper route.
|
|
Sulky Totally STABLE Embroidery Stabilizer!8″x12yd!WHIT $10.49 |
|
|
SULKY Totally Stable EMBROIDERY STABILIZER!12″x12yd!WHI $11.49 |
|
|
SULKY TOTALLY STABLE EMBROIDERY STABILIZER!20″x5yd!WHIT $12.49 |
|
|
SULKY TOTALLY STABLE EMBROIDERY STABILIZER!20″x3yd!WHIT $5.29 |
|
|
SULKY TOTALLY STABLE EMBROIDERY STABILIZER!20″x1yd!WHIT $2.29 |
|
|
SULKY TOTALLY STABLE EMBROIDERY STABILIZER!20″x25yd!WHI $42.99 |
|
|
SULKY TOTALLY STABLE EMBROIDERY STABILIZER!20″x25yd!BLA $48.99 |
|
|
SULKY TOTALLY STABLE EMBROIDERY STABILIZER!8″x12yd!BLAC $11.99 |
|
|
SULKY TOTALLY STABLE EMBROIDERY STABILIZER!12″x12yd!BLA $14.49 |
|
|
Sulky Totally Stable Stabilizer Roll 12″ x12 yd White $15.98 |
|
|
Madeira Super Stable Iron-on Cut-Away Stabilizer Roll $10.99 |
|
|
Madeira Cotton Stable Tear Away Embroidery Stabilizer $10.99 |
|
|
Sulky Totally Stable Stabilizer Roll 12″ x12 yd 661-12 $15.99 |
|
|
Sulky Totally Stable Stabilizer Roll 12″x12y BK 662-12 $18.96 |
|
|
Totally Stable Tear away Stabilizer Sulky 20″ x 3 yd $5.99 |
|
|
Totally Stable Tear away Stabilizer Sulky 20″ x 36″ $3.49 |
Antibody Stabilization – Antibody Secretion
Antibodies form the most fundamental unit of the human immune system. They are proteins that fight against foreign agents such as bacteria, viruses and fungi. Vaccines cause the production of antibodies against specific diseases in the body. Antisera are prepared by inoculating animals with certain antigens. When this is done, the animal produces antibodies against these antigens. The antibody secretion is collected as antisera. Antibodies and antiserum form the basis of the immunodiagnostics and immunotherapeutic industry.
However, it has not been possible to develop antibodies very extensively because of their stability issues. Antibodies lose their function if not handled carefully and gently. They are stable only in controlled environments with cold temperature. Due to this it has not been possible to use antibodies for non-medical research. Since antibodies are made of proteins, antibody stabilization basically involves aiming for protein stability.
Stabilized antibodies can have potential applications in the field of:
- Forensic analysis
- Chemical purification tools
- Chemical sensors
- Explosive sensors
- Chemical synthesis pathway control and modulation
- Bioremediation devices
- Antibody chip technology
- Pre-vaccination against new diseases
New applications in several other industries are also possible. In addition to the development of immunotherapeutic and immunodiagnostic industry, stabilized antibodies can give rise to business opportunities in non-medical fields also. The potential of antibodies has not been used completely because of the stability issues associated with it. They are only moderately stable and lose their function if structural changes take place. Thus, protein stabilization is important.
Scientists are researching ways of stabilizing the amino acids that make up the antibodies. They have been able to achieve antibodies that are 100,000 times more stable than the normal antibodies. If better results are achieved it will become possible to use antibodies for other applications as well such as environmental remediation, biosensors and diagnostic reagents.
About the Author
Article by Nadia at INTER-DEV SEO Company on behalf of Docoop Drug delivery systems
